KIT-DRIVESHAFT SMFR DRIVE SHAFT - MAIN DRIVE SHAFT IS ONE-PIECE W/INTEGRAL, SINGLE-LEAD WORK- HARDENED WORM AT FRONT TO DRIVE THE WHEEL WORM GEAR, & INTEGRAL SIX-LEAD WORK-HARDENED WORM AT REAR TO DRIVE THE TILLER GEAR (ALSO INCL. #1714, RACE FOR BEARING, & #9301). USED O
MTD-11603
4
KIT-DRIVESHAFT INERTIA WELDED SHAFT W/WELDED, SINGLE-LEAD HARDENED STEEL WORM AT FRONT TO DRIVE THE WHEEL WORM GEAR, & WELDED SIX-LAED HARDENED STEEL WORM AT REAR TO DRIVE THE TILLER GEAR. ALSO INCL. #1714, & #9301. USED ON: S/N E0047261 &UP; MODEL 15010 S/N 150100
MTD-10360
5
Washer, Flat, 1.50 x 1.75 x .010 SHIM BETWEEN DRIVE SHAFT REAR BEARING & REAR BEARING CAP TO ACHIEVE 5-TO- 10 THOUSANDTHS OF AN INCH (.005"-.010") END PLAY ON DRIVE SHAFT.
MTD-736-04308
5
BLADE:46":SIDE:HOP 532-405380 SHIM BETWEEN DRIVE SHAFT REAR BEARING & REAR BEARING CAP TO ACHIEVE 5-TO- 10 THOUSANDTHS OF AN INCH (.005"-.010") END PLAY ON DRIVE SHAFT.
MTD-742-05107-4046
5
Washer, Flat, 1.50 x 1.75 x .005 SHIM BETWEEN DRIVE SHAFT REAR BEARING & REAR BEARING CAP TO ACHIEVE 5-TO- 10 THOUSANDTHS OF AN INCH (.005"-.010") END PLAY ON DRIVE SHAFT.
MTD-736-04306
xx
Shim Set INCLUDES: TWO #1224-1; TWO #1224-2; ONE #1224-3
MTD-GW-1325C
